.png)
Requirements for the CAD drawing service “House editing in 2D for your project”
To use our CAD drawing service for House cuts in 2D for your project In order to be able to claim, you must meet the following requirements:
Product description
The product 2D house editing for your project Can you imagine cutting a piece out of a cake, which shows the individual layers of cake. Transferred to an object, this means that a cut is made through a building and can then be looked into the interior from the side. Such a 2D view of a property is necessary, among other things, as a document for construction financing or building applications.
Submission and information
To one 2D house editing for your project In order to be able to create, we depend on a template. You can either submit an old existing floor plan or a hand drawing of the section to us, as long as at least the external dimensions in length and width of the object are entered there.
Additional option: Additional measurement chain at Haus Schnitt
Please note that when you select the “measure chain” option for your 2D house editing for your project further information is required. This includes the dimensions in length and width of all rooms as well as the dimensions of the positions of windows, doors and other openings. Please also tell us the room height, the height of the roof and information on the roof pitch so that we can display them correctly.
Position and viewing angle of the cut
Another minimum requirement is that you tell us the position and angle of the desired cut. Should the cut go horizontally or vertically through your object? Should the section also show the stair situation in the case of multi-storey objects? Enter the pattern in the template and specify from which angle you want to look at the object.
Our tip: Are you unsure when choosing the point of intersection? You are welcome to leave this selection to us — just let us know that you need assistance.
Room height
For the product 2D house editing for your project The height of the room plays an important role. If you do not know the room heights, I ask you to determine them. To do this, measure the distance from the top of the floor to the bottom edge of the ceiling. We need the room height for each floor, especially in the basement and attic, as this may differ from the normal floor height.
Information about the roof
Finally, information about the roof is necessary. This includes information about which type of roof it is.
Good to know: If you are not sure which type of roof was built on your property, we recommend our article Gable roof, flat roof or hipped roof — what types of roof actually exist?
We also ask you to provide information on the height and inclination of your roof as well as the gable side. If you do not know these measurements or details, please do not attempt to determine them yourself. Instead, send us a photo of your roof and we'll create your house pattern with estimated dimensions.
conclusion
Are all the minimum requirements for 2D house editing for your project fulfilled? Go through it point by point in peace — good preparation is also half the battle with this product. If you have any further questions about this or other products, feel free to contact us.
Status: October 2024
